PublicHome/Hardware/ECU/Gen3Firmware Freightliner

< PublicHome‎ | Hardware‎ | ECU
Revision as of 14:15, 7 June 2022 by WikiAdmin (talk | contribs)

SpartanLync ECU GEN 3 Freightliner Firmware Information

ECU Firmware Introduction

Freightliner ECU Gen3.png

The SpartanLync GEN 3 ECU for Freightliner is the central electronic control unit for communication with SpartanLync TPMS sensors in a vehicle.

This page allows Freightliner service agents to perform a software update to the controlling firmware in these ECU devices.

Note: This ECU Firmware does not support SpartanLync TempTrac sensors

Freightliner ECU Flashing Requirements

The SpartanLync ECU Firmware Flashing requires the following

  • Freightliner-specific ECU installations
  • Windows Computer hardware-installed with a NexiQ USB-Link 2 adapter
  • 9-pin Deutsch Adapter cable (Standard 1 meter cable for use with USB-Link 2)
  • Spartanlync flash cable (Part number 110310000440)

NexiQ USB-Link 2 adapter.jpg

Freightliner ECU Firmware Update Requirements

Freightliner ECU Gen3 FirmwareUpdate.png
You should only update the ECU if it meets the following requirements

  1. Supplier Part Number: 110302020521
  2. SW version: V 1.1
  3. DTNA Part Number: 66-20640-000

Freightliner ECU Firmware Update Download

Retrieved from "https://help.spartansense.com/index.php?title=PublicHome/Hardware/ECU/Gen3Firmware_Freightliner&oldid=673"