PublicHome/Hardware/ECU/Gen1Firmware Freightliner

SpartanLync ECU GEN 1 Freightliner Firmware Information

ECU Firmware Introduction

Freightliner ECU.png

The SpartanLync GEN 1 ECU for Freightliner is the central electronic control unit for communication with SpartanLync TPMS sensors in a vehicle.

This page allows Freightliner service agents to perform a software update to the controlling firmware in these ECU devices.

Note: This ECU Firmware does not support SpartanLync TempTrac sensors

Freightliner ECU Flashing Requirements

The SpartanLync ECU Firmware Flashing requires the following

  • Freightliner-specific ECU installations
  • Windows Computer hardware-installed with a NexiQ USB-Link 2 adapter
  • 9-pin Deutsch Adapter cable (Standard 1 meter cable for use with USB-Link 2)
  • Spartanlync flash cable (Part number 110310000440)

NexiQ USB-Link 2 adapter.jpg

Freightliner ECU Firmware Update Requirements

You should only update the ECU if it meets the following requirements

  1. Part number: 110302080465
  2. SW version: V 5.2
  3. Time Range: Before Jan of 2021


Freightliner ECU VER52.png

Freightliner ECU Firmware Update Download