Difference between revisions of "PublicHome/Hardware/ECU/Gen1Firmware Freightliner"
< PublicHome | Hardware | ECU
| Line 2: | Line 2: | ||
== ECU Firmware Introduction == | == ECU Firmware Introduction == | ||
| − | The SpartanLync GEN 1 ECU for Freightliner is the central electronic control unit for communication with SpartanLync TPMS sensors in a vehicle. This page allows Freightliner service agents to perform | + | The SpartanLync GEN 1 ECU for Freightliner is the central electronic control unit for communication with SpartanLync TPMS sensors in a vehicle. This page allows Freightliner service agents to perform a software update to the controlling firmware in these ECU devices. |
<p>Note: '''This ECU Firmware does not support SpartanLync TempTrac sensors''' | <p>Note: '''This ECU Firmware does not support SpartanLync TempTrac sensors''' | ||
Revision as of 17:37, 5 November 2021
SpartanLync ECU GEN 1 Freightliner Firmware Information
Contents
ECU Firmware Introduction
The SpartanLync GEN 1 ECU for Freightliner is the central electronic control unit for communication with SpartanLync TPMS sensors in a vehicle. This page allows Freightliner service agents to perform a software update to the controlling firmware in these ECU devices.
Note: This ECU Firmware does not support SpartanLync TempTrac sensors
Freightliner ECU Flashing Requirements
The SpartanLync ECU Firmware Flashing requires the following
- Freightliner-specific ECU installations
- Windows Computer hardware-installed with a NexiQ USB-Link 2 adapter
- 9-pin Deutsch Adapter cable (Standard 1 meter cable for use with USB-Link 2)
- Spartanlync flash cable (Part number 110310000440)
Freightliner ECU Firmware Update Requirements
You should only update the ECU if it meets the following requirements
- Part number: 110302080465
- SW version: V 5.2
- Time Range: Before Jan of 2021
Freightliner ECU Firmware Update Downloads
- Download latest Firmware and the Windows Flash Utility (Installation and Flashing instructions included)
