Difference between revisions of "PublicHome/Hardware/ECU/Gen3Firmware Freightliner"

< PublicHome‎ | Hardware‎ | ECU
(Created page with "<strong>SpartanLync ECU GEN 1 Freightliner Firmware Information</strong> == ECU Firmware Introduction == right|frameless The SpartanLync GEN 3 E...")
 
Line 1: Line 1:
<strong>SpartanLync ECU GEN 1 Freightliner Firmware Information</strong>
+
<strong>SpartanLync ECU GEN 3 Freightliner Firmware Information</strong>
  
 
== ECU Firmware Introduction ==
 
== ECU Firmware Introduction ==

Revision as of 13:07, 7 June 2022

SpartanLync ECU GEN 3 Freightliner Firmware Information

ECU Firmware Introduction

Freightliner ECU.png

The SpartanLync GEN 3 ECU for Freightliner is the central electronic control unit for communication with SpartanLync TPMS sensors in a vehicle.

This page allows Freightliner service agents to perform a software update to the controlling firmware in these ECU devices.

Note: This ECU Firmware does not support SpartanLync TempTrac sensors

Freightliner ECU Flashing Requirements

The SpartanLync ECU Firmware Flashing requires the following

  • Freightliner-specific ECU installations
  • Windows Computer hardware-installed with a NexiQ USB-Link 2 adapter
  • 9-pin Deutsch Adapter cable (Standard 1 meter cable for use with USB-Link 2)
  • Spartanlync flash cable (Part number 110310000440)

NexiQ USB-Link 2 adapter.jpg

Freightliner ECU Firmware Update Requirements

Freightliner ECU VER52.png
You should only update the ECU if it meets the following requirements

  1. Part number: 110302080465
  2. SW version: V 5.2
  3. Time Range: Before Jan of 2021

Freightliner ECU Firmware Update Download